System information

Program 10 : System Configuration Setup
10-29 : SIP Proxy Setup
UX5000 Software Program Manual Programming ◆ 77
10-29 : SIP Proxy Setup
Description
Use Program 10-29 : SIP Proxy Setup to set the proxy options for SIP trunks.
Input Data
Level:
Feature Availability
SA • Available.
Item
No.
Item Input Data Default
Related
Program
01 SIP Proxy Setup - Default Outbound
Proxy
Define the SIP Proxy setup, Default Proxy
(Outbound). When SIP trunking is used,
this must be on.
Note; If entries are made in Program
10-29-xx for a SIP Server and the SIP
Server is then removed or not used, the
entries in Program 10-29-xx must be set
back to their default settings. Even if
10-29-01 is set to “0” (off), the UX5000
will still check the settings in the remain-
ing 10-29 programs.
0=off, 1=on 0
02 SIP Proxy Setup - Default Inbound
Proxy
Define the Default Proxy (inbound).
0=off, 1=on 0
03 Default Proxy IP Address
Enter the default Proxy IP Address if the
SIP carrier is using an IP address for the
proxy. In most cases, this will be left at the
default entry as the domain name is used.
0.0.0.1-126.255.255.254
128.0.0.1 - 191.255.255.254
192.0.0.1 - 223.225.255.254
0.0.0.0 10-29-01
10-29-02
04 Default Proxy Trans. Port
Define the Proxy Trans. port.
0-65535 5060 10-29-01
10-29-02
05 Registration Mode
Define the mode for the registration server.
This should always be set to manual when
using SIP trunking.
0=None
1=Manual
0
06 Registration IP Address
Define the Registration IP Address. The
carrier may provide an IP address. In most
cases, a domain name will be used so this
entry will be left at the default. This item is
only used when Program 10-29-05 is set to
“Manual”.
0.0.0.1-126.255.255.254
128.0.0.1 - 191.255.255.254
192.0.0.1 - 223.225.255.254
0.0.0.0 10-29-05