System information

Program 84 : Hardware Setup for VoIP
84-27 : VOIPDB Setup
UX5000 Software Program Manual Programming ◆ 909
84-27 : VOIPDB Setup
Description
Use Program 84-27 : VOIPDB Setup to define the basic options for the VoIP daughter board.
Input Data
Conditions
None
Feature Cross Reference
● VoIP
Level:
Feature Availability
IN • Available.
Slot Number 1
Item No. Item Input Data Default
01 DTMF Relay Setting
If option 1 is selected (In-Band DTMF Relay),
it is not reported to the host processor.
If option 2 is selected (Out-of-Band DTMF
Relay), tones are not passed as voice.
0 = DTMF
Relay Disabled
1 = In-Band
DTMF Relay
2 = Out-of-
Band DTMF
Relay
2
02 Codec mode Setting (G.723/iLBC Use Mode)
The codec mode must be set. Modes cannot be
simultaneous. When a mode is selected, there
may be a limitation on the number of channels
available.
0 = Default
1 = Mode 1
(G.723/iLBC)
0
03 SRTP Mode Setting
If this option is enabled, there may be a limita-
tion on the number of channels available.
0 = Disabled
1 = Enabled
0
04 SRTP Encryption Method
Set the Encryption method used.
0 = Mode 1 0
06 H.245 Port Number 0-65535 10100
07 Preparation Completion Response Port
Number
0-65535 4000