System information

Program 84 : Hardware Setup for VoIP
84-26 : VOIPDB Setup for Each DSP
UX5000 Software Program Manual Programming ◆ 907
84-26 : VOIPDB Setup for Each DSP
Description
Use Program 84-26 : VOIPDB Setup for Each DSP to setup the details for each DSP.
Input Data
Conditions
● The VOIPDB must be reset after making changes to this program or new calls will not be
accepted.
● The subnet mask of each DSP core is automatically set by the UX5000 and cannot be set
manually.
Level:
Feature Availability
IN • Available.
Slot Number 1
VoIP Gateway Number 1-8
Item
No.
Item Input Data Default
01 Internet Protocol Address
Only with the CygniLink feature:
Define the IP address of each DSP on a VOIPDB.
The third byte of an initial value of Internet Protocol address
becomes equal with the value of System ID set by 51-01-01.
Example:
System ID = For Slot1 of one : 172.16.1.20
0.0.0.1 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
Slot 1:
172.16.0.20
02 RTP Port Number
Set the UPD port number to be used for RTP traffic.
0-65534 GW1: 10020
GW2: 10052
GW3: 10084
GW4: 10116
GW5: 10148
GW6: 10180
GW7: 10212
GW8: 10244
03 RTCP Port Number
This must be set to RTP Port Number (item 02) + 1.
RTP Port Number + 1 GW1: 10021
GW2: 10053
GW3: 10085
GW4: 10117
GW5: 10149
GW6: 10181
GW7: 10213
GW8: 10245