System information

Program 84 : Hardware Setup for VoIP
84-11 : Dterm IP Codec Information Basic Setup
860 ◆ Programming UX5000 Software Program Manual
07 G.729 Audio Frame
Maximum number of G729 Audio Frames. G.729 assumes the audio
signal made by a specimen by 8kHz and the frame of 10ms is
assumed to be a unit to 8kbps by the encoding compressed method.
1-6
(1 = 10ms,
2 = 20ms, etc.)
3
08 G.729 Silence Compression (VAD) Mode
Select whether to compress silence with G.729. When there is silence,
the RTP packet is not sent.
0 = Disable
1 = Enable
0
09 G.729 Jitter Buffer - Minimum
Set the minimum value of the Jitter Buffer of G.729 is set. Jitter is the
variation in the time between packets arriving and the buffer allows
this variation to be absorbed.
Moreover, this option is adjusted with the UX5000 as it is used by
both IP terminals and the VOIPDB and the range of the adjustment of
Jitter for the IP terminal is narrower and transmitted to the IP termi-
nal. The range of IP terminal is 10-300 (10).
0-270 ms 30
10 G.729 Jitter Buffer - Standard
Set the average G.729 Jitter Buffer.
Moreover, this option is adjusted with the UX5000 as it is used by
both IP terminals and the VOIPDB and the range of the adjustment of
Jitter for the IP terminal is narrower and transmitted to the IP termi-
nal. The range of IP terminal is 10-300 (10).
0-270 ms 60
11 G.729 Jitter Buffer - Maximum
Set the maximum G.729 Jitter Buffer.
Moreover, this option is adjusted with the UX5000 as it is used by
both IP terminals and the VOIPDB and the range of the adjustment of
Jitter for the IP terminal is narrower and transmitted to the IP termi-
nal. The range of IP terminal is 10-300 (10).
0-270 ms 120
12 Number of G.723 Audio Frame
Maximum number of the G.723 Audio Frame (corresponds to 5.3kbps
ACELP method).
1 = 30 msec
2 = 60 msec
1
13 G.723 Silence Compression (VAD) Mode
If enabled, RTP packets are not sent for the compressed silence.
0 = Disable
1 = Enable
0
14 G.723 Jitter Buffer - Minimum
Set the minimum value of the G.723 Jitter Buffer.
Moreover, this option is adjusted with the UX5000 as it is used by
both IP terminals and the VOIPDB and the range of the adjustment of
Jitter for the IP terminal is narrower and transmitted to the IP termi-
nal. The range of IP terminal is 10-300 (10).
0-270 ms 30
15 G.723 Jitter Buffer - Standard
Set the average value of the G.723 Jitter Buffer.
Moreover, this option is adjusted with the UX5000 as it is used by
both IP terminals and the VOIPDB and the range of the adjustment of
Jitter for the IP terminal is narrower and transmitted to the IP termi-
nal. The range of IP terminal is 10-300 (10).
0-270 ms 60
Item
No.
Item Input Data Default