System information

Program 84 : Hardware Setup for VoIP
84-11 : Dterm IP Codec Information Basic Setup
UX5000 Software Program Manual Programming ◆ 859
84-11 : Dterm IP Codec Information Basic Setup
Description
Use Program 84-11 : Dterm IP Codec Information Basic Setup to setup the basic codec options
for the Dterm IP terminal.
Input Data
Level:
Feature Availability
IN • Available.
Type 1 = Type 1
2 = Type 2
3 = Type 3
4 = Type 4
5 = Type 5
Item
No.
Item Input Data Default
01 Number of G.711 Audio Frame
Maximum number of G711 Audio Frames. When the voice is
encoded using the PCM (Pulse Code Modulation) method, a unit is a
frame of 10ms.
1 = 10 ms
2 = 20 ms
3 = 30 ms
4 = 40 ms
3
02 G.711 Silence Detection (VAD) Mode
Select whether to compress silence with G.711. When there is silence,
the RTP packet is not sent.
0 = Disable
1 = Enable
0
03 G.711 Type
Set the type of G.711.
0 = A-law
1 = µ-law
1
04 G.711 Jitter Buffer - Minimum
Set the minimum value of the G.711 Jitter Buffer.
Moreover, this option is adjusted with the UX5000 as it is used by
both IP terminals and the VOIPDB and the range of the adjustment of
Jitter for the IP terminal is narrower and transmitted to the IP termi-
nal. The range of IP terminal is 10-300 (10).
0-160 ms 30
05 G.711 Jitter Buffer - Standard
Set the average value of the G.711 Jitter Buffer.
Moreover, this option is adjusted with the UX5000 as it is used by
both IP terminals and the VOIPDB and the range of the adjustment of
Jitter for the IP terminal is narrower and transmitted to the IP termi-
nal. The range of IP terminal is 10-300 (10).
0-160 ms 60
06 G.711 Jitter Buffer - Maximum
Set the maximum value of the G.711 Jitter Buffer.
Moreover, this option is adjusted with the UX5000 as it is used by
both IP terminals and the VOIPDB and the range of the adjustment of
Jitter for the IP terminal is narrower and transmitted to the IP termi-
nal. The range of IP terminal is 10-300 (10).
0-160 ms 120