System information

Program 10 : System Configuration Setup
10-26 : IP System Operation Setup
UX5000 Software Program Manual Programming ◆ 71
10-26 : IP System Operation Setup
Description
Use Program 10-26 : IP System Operation Setup to set the operation mode of the IP communi-
cations server.
Input Data
Conditions
None
Feature Cross Reference
VoIP
Level:
Feature Availability
IN • Available.
Item
No.
Item Input Data Default
Related
Program
01 IP Peer-to-Peer
This options allows a IP terminal to call another IP terminal
user without using DSP resources on the VOIPDB daughter
board.
0 = Disabled
1 = Enabled
1
02 RTP Forwarding
Enable or disable RTP Forwarding for the UX5000. If this
option is disabled, the DSP is used from the VOIPDB which
low load channel. If this option is enabled, the DSP is used
from the same VOIPDB channel.
0 = Disabled
1 = Enabled
0
03 SIP Peer-to-Peer
This options allows a standard SIP terminal and the SIP MLT
terminal to use Peer-to-Peer when calling another standard
SIP terminal or SIP MLT terminal. This allows the DSP
resources on the VOIPDB daughter board to be used for other
calls.
0 = Disabled
1 = Enabled
1
04 SIP-MLT Peer to Peer Mode
- Future Item -
Enable or disable whether SIP multi-line terminal calls are
Peer-to-Peer
0 = Disabled
1 = Enabled
1