System information

Program 84 : Hardware Setup for VoIP
84-03 : IP Terminal Information Basic Setup
UX5000 Software Program Manual Programming ◆ 849
84-03 : IP Terminal Information Basic Setup
Description
Use Program 84-03 : IP Terminal Information Basic Setup to define the details of the UX5000
IP terminal.
Input Data
Conditions
None
Feature Cross Reference
● VoIP
Level:
Feature Availability
IN • Available.
Item
No.
Item Input Data Default
01 NGT Signal Receive Port Number
Define the receiving port for IP control protocol.
0-65535 3458
02 DRS Port Number
Define the port number for the Device Registera-
tion Server.
0-65535 3456
03 - Not Used -
04 - Not Used -
05 - Not Used -
06 Area
Set the country for the IP terminal for the local
tone.
The UX5000 must be reset before this option will
take affect.
0 = Japan
1 = USA
2 = Australia
3 = EU
4 = Asia
5 = Other Country
1
07 Type of Service Mode
Set the type of service (ToS) mode.
1:Invalid
2:IP Precedence
3:Diffserve
1
08 Type of service
This data will be sent to NGT Terminal when
NGT Terminal is registered.
0x00-0xff
(use line keys 1-6
for letters A-F)
C0
09 Start Port
This entry indicates the starting port number for
IP terminals.
1-512 1