System information

Program 84 : Hardware Setup for VoIP
84-01 : Codec Information Basic Setup
844 ◆ Programming UX5000 Software Program Manual
63 G.722 Audio Frame
Maximum number of G.722 Audio Frames. G.722 assumes the audio
signal made by a specimen by 16kHz and the frame of 10ms is assumed
to be a unit to 64kbps by the encoding compressed method.
1 = 10 ms
2 = 20 ms
3 = 30 ms
4 = 40 ms
3
64 G.722 Silence Compression Mode
Select whether to compress silence with G.722. When there is silence,
the RTP packet is not sent.
0 = Disable
1 = Enable
0
65 G.722 Jitter Buffer - Minimum
Set the minimum value of the Jitter Buffer of G.722 is set. Jitter is the
variation in the time between packets arriving and the buffer allows this
variation to be absorbed.
0-160 ms 30
66 G.722 Jitter Buffer - Standard
Set the average G.722 Jitter Buffer.
0-160 ms 60
67 G.722 Jitter Buffer - Maximum
Set the maximum G.722 Jitter Buffer.
0-160 ms 120
68 G.726 Audio Frame
Maximum number of G.726 Audio Frames. G.726 assumes the audio
signal made by a specimen by 16kHz and the frame of 10ms is assumed
to be a unit to 32kbps by the encoding compressed method.
1 = 10 ms
2 = 20 ms
3 = 30 ms
4 = 40 ms
3
69 G.726 Silence Compression Mode
Select whether to compress silence with G.726. When there is silence,
the RTP packet is not sent.
0 = Disable
1 = Enable
0
70 G.726 Jitter Buffer - Minimum
Set the minimum value of the Jitter Buffer of G.726 is set. Jitter is the
variation in the time between packets arriving and the buffer allows this
variation to be absorbed.
0-160 ms 30
71 G.726 Jitter Buffer - Standard
Set the average G.726 Jitter Buffer.
0-160 ms 60
72 G.726 Jitter Buffer - Maximum
Set the maximum G.726 Jitter Buffer.
0-160 ms 120
73 iLBC Audio Frame
Maximum number of iLBC Audio Frames. iLBC assumes the frame of
10ms is a unit.
2 = 20 ms
3 = 30 ms
4 = 40 ms
3
74 iLBC Silence Compression Mode
Select whether to compress silence with iLBC. When there is silence,
the RTP packet is not sent.
0 = Disable
1 = Enable
0
75 iLBC Jitter Buffer - Minimum
Set the minimum value of the Jitter Buffer of iLBC is set. Jitter is the
variation in the time between packets arriving and the buffer allows this
variation to be absorbed.
0-160 ms 30
76 iLBC Jitter Buffer - Standard
Set the average iLBC Jitter Buffer.
0-160 ms 60
Item
No.
Item Input Data Default