System information

Program 82 : Basic Hardware Setup for Extension
82-09 : SLIU Codec Filter Data Setup
836 ◆ Programming UX5000 Software Program Manual
82-09 : SLIU Codec Filter Data Setup
Description
The UX5000 will use the settings in the new Program 82-09 : SLIU Codec Filter Data Setup
when Program 82-07-01 : Codec Filter Setup for Analog Station Ports is set to "4 - Specified
Data".
These values should not be changed from their default settings unless directed by NEC’S Technical
Service department.
The side tone of the SLIU is adjusted using all 16 values, however, special software is required in
order to compute these values. The setting is not proportional to the gain level. To change these
values, contact NEC’s Technical Service department for assistance.
Input Data
Level:
Feature Availability
IN • Available.
Item Codec Filter Item Description Range Default
01 01 B1 Filter (01) 0-255 42
02 02 B1 Filter (02) 0-255 251
03 03 B1 Filter (03) 0-255 93
04 04 B1 Filter (04) 0-255 188
05 05 B1 Filter (05) 0-255 77
06 06 B1 Filter (06) 0-255 195
07 07 B1 Filter (07) 0-255 58
08 08 B1 Filter (08) 0-255 76
09 09 B1 Filter (09) 0-255 166
10 10 B1 Filter (10) 0-255 168
11 11 B1 Filter (11) 0-255 244
12 12 B1 Filter (12) 0-255 255
13 13 B1 Filter (13) 0-255 34
14 14 B1 Filter (14) 0-255 240
15 15 B2 Filter (01) 0-255 61
16 16 B2 Filter (02) 0-255 1