System information

Program 80 : Basic Hardware Setup for System
80-10 : MF Tone Receiver Setup
UX5000 Software Program Manual Programming ◆ 799
Default
Conditions
None
Feature Cross Reference
● Central Office Calls, Answering
Terminal Programming Instructions
To enter data for Program 80-10 (MF Tone Receiver Setup):
1. Enter the programming mode.
2. 80 10
3. Enter the number of the item you want to program.
4. Enter the type number to be defined or press FLASH to use the displayed entry.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MIC once to enter a new item number.
OR
Press MIC until you’ve exited that series’s programming section.
Item Name Type 1 Type 2 Type 3 Type 4 Type 5
01 Detect Level 00000
02 Start Delay Time 00000
03 Min. Detect Level 10 (-20dBm) 10 (-20dBm) 10 (-20dBm) 10 (-20dBm) 10 (-20dBm)
04 Max. Detect Level 2 (-2dBm) 2 (-2dBm) 2 (-2dBm) 2 (-2dBm) 2 (-2dBm)
05 Twist Level 5 (6dBm) 5 (6dBm) 5 (6dBm) 5 (6dBm) 5 (6dBm)
06 S/N Ratio 2 (-2dBm) 2 (-2dBm) 2 (-2dBm) 2 (-2dBm) 2 (-2dBm)
07 ON Detect Time 1 (30ms) 1 (30ms) 1 (30ms) 1 (30ms) 1 (30ms)
08 OFF Detect Time 1 (30ms) 1 (30ms) 1 (30ms) 1 (30ms) 1 (30ms)
80-10-01 Type1
Detect Level 0
back
↑ ↓ select
80-10-nn Typen
nnnnn
← →