System information

Program 51 : CygniLink Service
51-08 : New Primary System Setting
UX5000 Software Program Manual Programming ◆ 761
51-08 : New Primary System Setting
Description
Use Program 51-08 : New Primary System Setting to define the settings for the Primary UX5000
if the Primary is forced manually.
Input Data
Conditions
● Program 51-06-01 must be set to “0” and 51-07-01 must be set to “1” in order for this pro-
gram to work.
● The network must be connected to the Primary UX5000 and the IP address must be displayed
in 51-11-03 to specify the new primary by system ID.
Feature Cross Reference
● Networking - CygniLink
Level:
Feature Availability
IN • Available.
Item No. Item Input Data Default
01 Internet Protocol Address of New Primary
When forcing the UX5000 to update to a new Primary
UX5000, the UX5000 using the IP address defined here
as the new Primary.
Note: After a Forced Change of Primary UX5000 is
done, this entry will be erased.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
02 System ID of New Primary
If an IP address is displayed in Program 51-11-03, you
can execute a Forced Change Primary UX5000 by enter-
ing the UX5000 ID. If this ID is set to “0”, the Top Pri-
ority UX5000 will be selected as the new Primary.
0-50 Blank