System information

Program 51 : CygniLink Service
51-06 : CygniLink Primary System Automatic Integration Setting
UX5000 Software Program Manual Programming ◆ 757
51-06 : CygniLink Primary System Automatic Integration Setting
Description
Use Program 51-06 : CygniLink Primary System Automatic Integration Setting to set the
automatic integration. This will allow for multiple primary UX5000s which may have occurred due
to Fail Over to be restructured around the recovered top priority Primary UX5000.
Input Data
Conditions
None
Feature Cross Reference
● Networking - CygniLink
Level:
Feature Availability
IN • Available.
Item No. Item Input Data Default
01 Primary Automatic Integration
When Fail Over occurs, multiple Primary
UX5000s may be established. When the connec-
tion is recovered, with this option enabled, the
CygniLink feature will automatically be
re-established around the top priority Primary
UX5000.
0 = Disabled
1 = Enabled
0
02 Blade Reset Timing Option
When the Primary Automatic Integration
re-establishes the CygniLink network, the blades
in the secondary UX5000s are reset. This option
determines if the secondary UX5000 blades are
reset only when all blades are idle (0) or at any
time (1).
0 = Disabled
1 = Enabled
0