System information

Program 51 : CygniLink Service
51-05 : Timer Settings for CygniLink
UX5000 Software Program Manual Programming ◆ 755
51-05 : Timer Settings for CygniLink
Description
Use Program 51-05 : Timer Settings for CygniLink to set the various timers used with the
CygniLink feature.
Input Data
Level:
Feature Availability
IN • Available.
Item No. Item Input Data Default
01 Keep Alive Sending Interval
Set the interval for the secondary UX5000 to
send the Keep Alive packet to the Primary
UX5000 to confirm communication.
1-3600 5
02 Keep Alive Response Waiting Time
The secondary UX5000 will wait this interval
for response to the Keep Alive packet to confirm
communication with Primary UX5000. If no
response is received, Fail Over occurs. A setting
of ‘0’ will disable this and the UX5000 will wait
indefinitely for a response from the Primary
UX5000. For Fail Over to occur, this timer must
be set to an entry other than ‘0’.
0, 5-10800 20
03 Primary Search Packet Sending Interval
This timer determines how long between pack-
ets the UX5000 will wait when searching for a
new Primary UX5000 with the Fail Over fea-
ture.
1-3600 5
04 Top Primary Search Time
Set the interval between packet sending when
the UX5000 is reviewing priority levels for a
new higher-priority Primary UX5000.
5-10800 20
05 Top Priority Primary Detection Packet
Sending Interval
When the current Primary UX5000 is not the
Top Priority Primary UX5000, the UX5000
sends packets at this interval to check if a higher
riority UX5000 exists.
1-3600 10
06 Primary System Seeking Time with Foreced
Change Primary
When the Forced Change Primary command is
executed, the UX5000 will search for the new
Primary UX5000 for this time.
1-10800 30