System information

Program 51 : CygniLink Service
51-03 : CygniLink Internet Protocol Address List Setting
UX5000 Software Program Manual Programming ◆ 751
51-03 : CygniLink Internet Protocol Address List Setting
Description
Use Program 51-03 : CygniLink Internet Protocol Address List Setting to define the addresses
of the linked UX5000s. When the Fail Over feature is activated, the UX5000 checks this informa-
tion to establish a new link to the Primary UX5000.
Input Data
Conditions
None
Feature Cross Reference
● Networking - CygniLink
Level:
Feature Availability
IN • Available.
List ID 01-50
Item No. Item Input Data Default
01 Internet Protocol Address List
The UX5000 sees the Primary UX5000 from within this list.
When no Primary UX5000 is seen or Fail Over occurs, the
Node List is referred to in order to establish a new link. This
setting is necessary when Program 51-01-03 is set to ‘0’ or
Program 51-05-02 is other than ‘0’.
Enter IP addresses for any UX5000 which is included in the
network (especially the Primary UX5000). Once the UX5000
connects to the Primary UX5000, this setting is updated by
the Primary UX5000 when Program 51-13-01 is enabled.
This will allow any new or changed UX5000s to be added
automatically.
An IP address cannot be defined more than once.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0