System information

Program 47 : IntraMail
47-13: IntraMail Dial Action Tables
732 ◆ Programming UX5000 Software Program Manual
Input Data
Dial Action Table Number 01-16
Key 1-9 = 1-9
10 = 0
11 = *
12 = #
13 = Timeout
Item Name Additional Data
01 Dial Action Table
Action
If Action is set to 0
or 6, the Data setting
is skipped.
0=UND Action - Undefined Routing (UND)
1=TRF Action - Screened Transfer (TRF)
2=UTRF Action - Unscreened Transfer (UTRF)
3=REC1 Action - Quick Message With Greeting (REC1)
4=REC2 Action - Quick Message Without Greeting (REC2)
5=LOGON Action - Log Onto Voice Mail (LOGON)
6=Hang Up Action (HNGUP)
7=GOTO Action - Go to Mailbox (GOTO)
LK1=Undefined
LK2=TRF
LK3=UTRF
LK4=REC1
LK5=REC2
LK6=LOGON
LK7=Hangup
Data • Digits Entry : 0-9, #, and * (8 digits max.)
Use Dial Action Table digits to route an Automated Attendant call to a specific
location (such as an extension). For example, to set up a TRF Action to route to
extension 305, for digit 3 enter TRF for the Action and 305 for the corresponding
Number.
• No Routing Entry : N (Entered by pressing LK1)
Use the N option when you want no Automated Attendant routing to automati-
cally occur. This can be used with the LOGON action when you want to prompt
the caller to enter a mailbox number. To do this for the # key (for example), for
the # key enter LOGON for the Action and N for the corresponding Number.
When the caller dials #, they hear, “Please enter the mailbox number. Or, to exit,
press the pound key.”
• Caller Dialed Digits Entry : X (Entered by pressing LK2)
Use the X option to route an Automated Attendant call based on digits the caller
dials. Each X entry represents one caller-dialed digit. For example, to set up a
TRF Action to route to any caller dialed extension in the 301-399 range, for digit
3 enter TRF for the Action and XXX for the corresponding Number.
• Ignore Digits Entry : I (Entered by pressing LK3)
Use the I option to represent any digit dialed by the Automated Attendant caller
that IntraMail ignores for routing. An example of this is REC action assigned to
the * key in Dial Action Table 1 by default. The Action is REC2 and the Number
is IXXX. This means that a caller can dial * + any mailbox number to leave a
Quick Message in that mailbox. IntraMail ignores the first digit dialed by the
caller (*), and routes according to the next 3 digits dialed.
• Pause Entry : P (Entered by pressing LK4)
Use the P option when you want the Automated Attendant to pause while dialing.
To set the duration of the pause, use 81-01-16: Pause Time. The default for the
pause is 75s mS.