System information

Program 47 : IntraMail
47-06: Group Subscriber Mailbox Options
UX5000 Software Program Manual Programming 705
05 Recording Conversation Beep
(Rec Conv Beep)
Use this option to enable or disable the Conversation Record
beep. If enabled, all parties on a call will hear the voice prompt
Recording followed by a single beep when the extension user
initiates Conversation Record. If disabled, the voice prompt and
beep will not occur. When you disable the Conversation Record
beep, the following voice prompts do not occur while IntraMail
records the conversation:
“Recording” (followed by a beep)
“That mailbox is full” (if the mailbox message storage
capacity is reached)
“You have reached the recording limit” (if the recorded
message is too long)
The UX5000 software provides an additional Conversation
Record beep. This beep repeats according to the setting of Pro-
gram 45-01-06: Voice Mail Integration Options: Record
Alert Tone Interval Time (0-64800 seconds). To disable the
UX5000 Conversation Record beep, enter 0 for this option.
1 (Yes - enabled)
0 (No - disabled)
1 (Yes -
enabled)
06 Message Waiting Lamp
(Update MW Lamp)
Use this option to enable or disable Message Waiting lamping
at the extension associated with the Subscriber mailbox. For
Subscriber Mailboxes, you should leave this option enabled.
For Guest Mailboxes, you should leave this option disabled.
1 (Yes - enabled)
0 (No - disabled)
1 (Yes -
enabled)
07 Auto Attendant Direct to Voice Mail
(Auto-ATT Direct VM)
Use this option to enable or disable Auto Attendant Direct to
Voice Mail. When a subscriber enables Auto Attendant Direct
to Voice Mail, an Automated Attendant caller will route directly
to the mailbox, hear the greeting, and be asked to leave a mes-
sage.
1 (Yes - enabled)
0 (No - disabled)
0 (No -
disabled)
08 Forced Unscreened Transfer
(Forced UTRF)
Use this option to enable or disable Automated Attendant
Forced Unscreened Transfer for the Subscriber Mailbox. If
enabled, each Screened Transfer (TRF) to the extension is con-
verted to an Unscreened Transfer (UTRF). If disabled, Screened
Transfers from the Automated Attendant occur normally.
1 (Yes - enabled)
0 (No - disabled)
0 (No - dis-
abled)
09 Auto Time Stamp
(Auto Time Stamp)
Use this option to enable or disable Auto Time Stamp for the
Subscriber Mailbox. If enabled, after the subscriber listens to a
message IntraMail will announce the time and date the message
was left. Auto Time Stamp will also announce the message
sender (if known).
A subscriber can also enable Auto Time Stamp from their mailbox.
1 (Yes - enabled)
0 (No - disabled)
0 (No -
disabled)