System information

Program 45 : Voice Mail Integration
45-02 : NSL Option Setup
686 ◆ Programming UX5000 Software Program Manual
45-02 : NSL Option Setup
Description
Use Program 45-02 : NSL Option Setup to customize the NSL options for Voice Mail integration.
Input Data
Conditions
None
Feature Cross Reference
● Voice Mail
Level:
Feature Availability
SA • Available.
Item No. Item Input Data Default
01 Send DTMF Tone or 6KD Message
With 6KD enabled, the UX5000 uses NSL
messages to communicate with an Intra-
Mail voice mail port (rather than DTMF
tones). This is required for IntraMail
operation.
0 = Sending DTMF Tone to
SLT-VM Port
1 = Sending 6KD Message
to Serial Port
1
02 Forced Send Dial Tone 0 = Normal
1 = Forced
0
03 Send 5IA Message
With 51A enabled, when an IntraMail port
is placing a call, the UX5000 will send
NSL messages to IntraMail that provide
the call status. This typically occurs dur-
ing Make Call and Message Notification
callouts. This is required for IntraMail
operation.
0 = Off
1 = On
1
04 NSL Over LAN
- Future Item - Not Yet Used -
0 = Off
1 = On
0