System information

Program 44 : ARS/F-Route Setup
44-06 : Additional Dial Table
UX5000 Software Program Manual Programming ◆ 675
44-06 : Additional Dial Table
Description
Use Program 44-06 : Additional Dial Table to set the additional dial table to add prior to the
dialed ARS/F-Route number. The Additional Dial Table used is determined in Program 44-05-03.
Input Data
Conditions
None
Feature Cross Reference
● Automatic Route Selection (ARS)/F-Route
Terminal Programming Instructions
To enter data for Program 44-06 (Additional Dial Table):
1. Enter the programming mode.
2. 44 06
3. Enter the number of the item you want to program.
4. Enter the Additional Dial Table number to be defined or press FLASH to use the displayed
entry.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MIC once to enter a new item number.
OR
Press MIC until you’ve exited that series’s programming section.
Level:
Feature Availability
IN • Available.
Additional Dial Table Number 1-1000
Item No. Additional Dial Default
01 Up to 24 digits
Enter: 1-9, 0, *, #, Pause (press line key 1 to enter a pause)
No setting
4-06-01 Add TBL1
Dial =
back
↑ ↓ select
44-06-nn Add TBLnnnn
nnnnn
← − + →