System information

Program 44 : ARS/F-Route Setup
44-01 : System Options for ARS/F-Route
UX5000 Software Program Manual Programming ◆ 667
Program 44 : ARS/F-Route Setup
44-01 : System Options for ARS/F-Route
Description
Use Program 44-01 : System Options for ARS/F-Route to define the UX5000 options for the
ARS/F-Route feature.
Input Data
Conditions
None
Feature Cross Reference
● Automatic Route Selection (ARS)/F-Route
Terminal Programming Instructions
To enter data for Program 44-01 (System Options for ARS/F-Route):
1. Enter the programming mode.
2. 44 01
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press MIC once to enter a new item number.
OR
Press MIC until you’ve exited that series’s programming section.
Level:
Feature Availability
IN • Available.
Item No. Item Input Data Default
01 ARS/F-Route Time Schedule
If this option is set to ‘0’, the F-Route table selected is determined only by the
digits dialed without any relation to the day or time of the call.
If this option is set to ‘1’, the UX5000 first refers to Program 44-10. If there is
a match, the pattern defined in that program is used. If not, the F-Route pat-
tern in Program 44-09 and time setting in 44-08 are used.
0 = Not Used
1 = Used
0
44-01-01
F-Route_Mode 0:No
back
↑ ↓ select
44-01-nn
nnnnn
← →