System information

Program 42 : Hotel Setup
42-05 : Hotel Room Status Printer
662 ◆ Programming UX5000 Software Program Manual
42-05 : Hotel Room Status Printer
Description
Use Program 42-05 : Hotel Room Status Printer to set the output port for the Hotel Data
(Check-Out sheet, Room Status etc...) and the output options for the Hotel/Motel feature.
Input Data
Conditions
Room Status Reports require a LAN connection or a CTA and a compatible printer. Refer to Data
Communications in the feature section for information.
Feature Cross Reference
● Hotel/Motel
Level:
Feature Availability
IN • Available.
Item No. Item Input Data Default
01 Output Port Type
If a Hotel Room Status Printer is
to be used, enter “3” to select
the LAN output.
0 = No setting
1 = CTA
3 = LAN
0
02 Output Destination Number
Enter the CTA extension num-
ber to which the Hotel Room
Status Printer is connected.
Up to 8 digit
(Extension number which CTA/CTU is
equipped.)
No setting
03 Wake Up Call No Answer
Data
Enable or disable the ability to
have unanswered Wake Up
Calls automatically print on the
Room Status Printer.
0 = No output
1 = Output Unanswered Wake Up Calls
0
04 Check-Out Sheet
Enable or disable the ability to
have the Room Status Printer
automatically print when a room
Checks Out.
0 = No output
1 = Output Room Check Out
0