System information

Program 40 : Voice Mail Setup
40-10 : Voice Announcement Service Option
606 ◆ Programming UX5000 Software Program Manual
Conditions
None
Feature Cross Reference
● Voice Response System (VRS)
Terminal Programming Instructions
To enter data for Program 40-10 (Voice Announcement Service Option):
1. Enter the programming mode.
2. 40 10
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press MIC once to enter a new item number.
OR
Press MIC until you’ve exited that series’s programming section.
08 Busy Call Attendant Message
Define the Call Attendant message number to be heard when
a called extension is busy. This is used when setting the
option system-wide. (Program 15-01-08 is not used.)
0=no message
001-100= mes-
sage number
0 15-01-08
09 No Answer Call Attendant Message
Define the Call Attendant message number to be heard when
a called extension does not answer. This is used when set-
ting the option system-wide. (Program 15-01-09 is not
used.)
0=no message
001-100= mes-
sage number
0 15-01-08
40-10-01
VRS Fixed Msg 1:Use
back
↑ ↓ select
40-10-nn
nnnnn
← →