System information

Program 35 : SMDR and Account Code Setup
35-02 : SMDR Output Options
UX5000 Software Program Manual Programming ◆ 585
Conditions
None
Feature Cross Reference
● Station Message Detail Recording
Terminal Programming Instructions
To enter data for Program 35-02 (SMDR Output Options):
1. Enter the programming mode.
2. 35 02
3. Enter the number of the item you want to program.
4. Enter the SMDR port number to be defined or press FLASH to use the displayed entry.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MIC once to enter a new item number.
OR
Press MIC until you’ve exited that series’s programming section.
20 External Information CFW Mode
Determine which information is displayed in the "STATION" area for a
transferred call when the extension has Call Forward set with an Abbre-
viated Dial number as the destination. Selecting "0" (Transfer Info) will
display the extension number which called the extension with external
Call Forward set. Selecting "1" (Incoming Info) will display the exten-
sion number which has the external Call Forward set.
This option only applies when Call Forward is set using a service code
(Program 11-11-01~11-11-07) and the destination uses an Abbreviated
Dial bin. It does not include Off-Premise or Centrex transfers.
0 = Transfer Information
1 = Incoming Information
0
35-02-01 SMDR Port1
T/R Call 1:Display
back
↑ ↓ select
35-02-nn SMDR Portn
nnnnn
← − + →
Item
No.
Item Input Data Default