System information

Program 34 : Tie Line Setup
34-09 : ANI/DNIS Service Options
UX5000 Software Program Manual Programming ◆ 577
Conditions
None
Feature Cross Reference
● T1 Trunking (with ANI/DNIS Compatibility)
● Tie Lines
Terminal Programming Instructions
To enter data for Program 34-09 (ANI/DNIS Service Options):
1. Enter the programming mode.
2. 34 09
3. Enter the number of the item you want to program.
4. Enter the Class of Service number to be defined or press FLASH to use the displayed entry.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MIC once to enter a new item number.
OR
Press MIC until you’ve exited that series’s programming section.
08 Routing When Destination Busy or No
Answer
This option lets you determine how the
UX5000 will handle an ANI/DNIS call if des-
tination is busy or does not answer.
0 = Play busy or ring-
back tone to caller
1 = Route the caller to
the ring group speci-
fied in Program 25-04
0 0 25-04
09 Calling Number Address Length
When Item 1=0 (ANI/DNIS receive format is
address), use this option to specify the address
length. The choices are from 1 to 8 digits in
length.
1-8 7 7 34-09-01
34-09-01 FCTN Cls1
Format 0:Address
back
↑ ↓ select
34-09-nn FCTN Cls1
nnnnn
← − + →
Item
No.
Name Input Data
Default
Related
Program
COS 01-14 COS 15