System information

Program 10 : System Configuration Setup
10-09 : DTMF and Dial Tone Circuit Setup
38 ◆ Programming UX5000 Software Program Manual
10-09 : DTMF and Dial Tone Circuit Setup
Description
Use Program 10-09 : DTMF and Dial Tone Circuit Setup to allocate the circuits on the CPU
blades for either DTMF receiving or dial tone detection. The CCPU blade has 32 circuits initially.
On the UX5000, with an EXIFU installed, an additional 64 circuits are provided. These are used as
follows:
● Extension DTMF receiver for SLT
● Trunk DTMF receiver for analog trunks, dial tone & busy tone detection
for analog trunks
Input Data
Conditions
An EXIFU blade must be installed to access resources 97-160.
Feature Cross Reference
● Caller ID
● Central Office Calls, Placing
● Direct Inward Dialing (DID)
● Direct Inward System Access (DISA)
● Tie Lines
Level:
Feature Availability
IN • Available.
Circuit/Resource Number 01-160
Item No. Input Data Default Setting
01 0 = Common use
1 = Extension only
2 = Trunk only
Circuit/Resource 01-08: 1 (Extension only)
Circuit/Resource 09-32: 2 (Trunk only)
Circuit/Resource 97-160: 0 (Common use) [requires EXIFU]
(Resources 33-96 are not used/dummy ports.)