System information

Program 30 : DSS/DLS Console Setup
30-03 : DSS Console Key Assignment
516 ◆ Programming UX5000 Software Program Manual
83 Live Record Function 0 = Pause
1 = Re-record
2 = Recording confirmation
3 = Deletion
4 = Notification
84 Drop Key
85 Directory Dialing
86 Set Private Call Refuse
This key enables/disables the
“Private” call refusal for the
trunks set to "1" in Program
14-01-27.
Slow Blink (Red): Active
87 Set Caller ID Refuse
This key enables/disables the
Caller ID number refusal for the
trunks set to "1" in Program
14-01-27.
Slow Blink (Red): Active
88 DID Mode Switching
Assign a key for DID Mode
Switching. This key can be used
to manually change the time
pattern for a DID number.
Program 22-17 Table
Number (1-100)
Pattern 1 = LED off
Pattern 2 = LED on
Pattern 3 = slow flash
Pattern 4 = fast flash
Patterns 5-8 = off
89 Do-Not-Call Function Switch
Switches Do-Not-Call on or off.
90 Do-Not-Call Data Registra-
tion
92 Wake Up Call Indication
93 Room Status Indication
94 VRS Call Attendant
This allows a user to set the fea-
ture as needed. After the key is
defined, press it once for Busy
and the LED will flash slowly.
Press the key a second time for
No Answer Call Attendant and
the LED will flash fast. Press the
key a third time for Busy/No
Answer Call Attendant and the
LED will remain solid. Pressing
the key a fourth time will turn
the function off.
Busy = stutter flash
No Answer = fast flash
Busy/No Answer = LED on
Function
Number
Function Additional Data LED Indication