System information

Program 30 : DSS/DLS Console Setup
30-03 : DSS Console Key Assignment
UX5000 Software Program Manual Programming ◆ 511
30-03 : DSS Console Key Assignment
Description
Use Program 30-03 : DSS Console Key Assignments to customize the key assignments for
60-Button DSS Consoles. This program is also used to define Aspire 110-Button DSS Consoles if
used on the UX5000. The DSS Console keys can be programmed using any of the function codes
listed below. In addition, the key (when defined as a DSS/One-Touch key [code 01] can have any
function up to four digits long (e.g., extension number or Service Code). The function information
(such as extension number or Service Code) would then be entered as the additional data.
To prevent lamping problems when reassigning DSS Console keys, it is recommended that you
clear an extension's programmed key before reassigning it (Enter key to be cleared + 00 or *00 [If
using Web or PC Programming, delete the key assignments and upload the change to the UX5000
before proceeding]). Without clearing an extension's key first, your DSS Console may not show the
correct lamping, although the DSS function will work correctly.
If you are programming the UX5000 from the extension to which the DSS Console is connected,
either by terminal or using the Web or PC Program, you may need to unplug the DSS and plug it
back in to reset the console's lamping.
Input Data
Index 1
Index 2
Level:
Feature Availability
SA • Available.
DSS Console Number 01-32
Item No. Key Number Function Number Additional Data
01 001-200 0-99 (General functional level)
* 00-* 99 (Appearance functional level)
Refer to functional number list