System information

Program 10 : System Configuration Setup
10-06 : ISDN BRI Setup
UX5000 Software Program Manual Programming ◆ 33
10-06 : ISDN BRI Setup
Description
Use Program 10-06 : ISDN BRI Setup to define the TEI selection and DID mode for DID callers
when the BRI feature is used.
Enter the SPID (Service Profile ID) assigned to each of the UX5000’s BRI ISDN lines. Each BRI
blade has a maximum of two lines and each line can have a maximum of two SPIDs. To use both
channels of a BRI ISDN line, two directory numbers must be ordered from telco. A SPID is
assigned for each directory number.
Input Data
- INDEX-1
-
- INDEX-2 -
Conditions
None
Level:
Feature Availability
IN • Available.
Slot Number 01-24
ISDN Line Number 1-4
Item
No.
Item Input Data Default
01 TEI Selection
Set the method the UX5000
will use when assigning Ter-
minal Endpoint Identifier
(TEI) values to BRI ports.
0 = Select by SPID number
1 = Select by Channel ID number
0
02 DID Mode 0 = Route by Called Party Number
1 = Route by Redirecting Number
0
03 SPID 1 Dial (up to 20 digits) No Setting
04 SPID 2 Dial (up to 20 digits) No setting