System information

Program 22 : Incoming Call Setup
22-12 : DID Intercept Ring Group
426 ◆ Programming UX5000 Software Program Manual
22-12 : DID Intercept Ring Group
Description
For each DID Translation Table, use Program 22-12 : DID Intercept Ring Group to define the
first destination group for DID calls.
Depending on the entry in Program 22-09-02 and 22-11-04, the incoming calls will route to the first
destination group by the following:
● Vacant number intercept (vacant number means that there is no terminal connected, no station
card installed, or the extension number is not defined in Program 11-02)
● Busy intercept
● Ring-no-answer intercept
If the destination is '0', the calls will be forwarded to the trunk ring group defined in Program 22-11
based on the table assigned to the DID trunk.
Note: If Program 22-11-05 and 22-11-06 are set, the priority of transferring will be in this order:
Program 22-11-05 ☞ Program 22-11-06 ☞ Program 22-12.
For busy and no-answer calls, if the first and third destinations are programmed but the sec-
ond destination is not, the incoming call goes to the third destination after the first destina-
tion. If the first and second destinations are not defined, but the third destination is, the call
goes directly to the third destination (as defined in Program 22-12).
Input Data
Conditions
None
Feature Cross Reference
● Direct Inward Dialing (DID)
Level:
Feature Availability
IN • Available.
Conversion Table Area Number 01-20
Item No. Day/Night Mode Incoming Group Number Default
01 1-8 0 (No Setting)
1-100 (Incoming Group)
102 (In-Skin/External Voice Mail)
103 (Centralized Voice Mail)
1