System information

Program 22 : Incoming Call Setup
22-02 : Incoming Call Trunk Setup
UX5000 Software Program Manual Programming ◆ 405
22-02 : Incoming Call Trunk Setup
Description
Use Program 22-02 : Incoming Call Trunk Setup to assign the incoming trunk type for each
trunk. There is one item for each Night Service Mode.
Input Data
Conditions
● When connecting to T1 trunks, after changing Program 22-02-01 to match the telco’s con-
nected T1 service type, the T1 cable or the T1 blade must be unplugged and then reconnected
in order for the T1 blade to sync.
Feature Cross Reference
● Central Office Calls, Answering
Level:
Feature Availability
IN • Available.
Trunk Port Number 1-200
Item
No.
Day/Night
Mode
Incoming Type Default Description
Related
Program
01 1-8 0 = Normal
1 = VRS (Second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed DID
7 = ANI/DNIS
8 = DID Call by Time Schedule
0 Use this option to set the feature
type for the trunk you are
programming.
If the VRS Call Attendant feature
is used, the trunk must be set to
VRS or DISA.
14-04