System information

Program 22 : Incoming Call Setup
22-01 : System Options for Incoming Calls
404 ◆ Programming UX5000 Software Program Manual
Conditions
None
Feature Cross Reference
● Central Office Calls, Answering
Terminal Programming Instructions
To enter data for Program 22-01 (System Options for Incoming Call Service):
1. Enter the programming mode.
2. 22 01
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press MIC once to enter a new item number.
OR
Press MIC until you’ve exited that series’s programming section.
10 VRS Waiting
Message
Operation
0=Automatic
1=Change by
manual operation
0 This program sets up the operation mode
for Auto Attendant and Queuing Message.
If there is no response during the fixed
time for a call, the waiting message is sent
to the caller until a response is received.
15-07
20-15-11
22-01-04
22-04
22-08
22-14
22-15
11 VRS Waiting
Message Interval
Time
0-64800 (Sec.) 20 Setup the sending duration time of the
Auto - Attendant & Queuing.
The message is repeatedly sent out within
the specified time.
A ringback, internal tone or external hold-
ing tone is heard between the messages.
22-14-06
22-15-06
41-11-06
22-01-01
INC_Priority 1:Trunk
back
↑ ↓ select
22-01-nn
nnnnn
← →
Item
No.
Item Input Data Default Description
Related
Program