System information

Program 10 : System Conﬁguration Setup

10-03 : Blade Setup

26 ◆ Programming UX5000 Software Program Manual

Note 1. The start port number of a PRI line is displayed. Thirty logic ports are automatically

assigned to a PRI line.

Note 2. Each timer value of Layer3 is set up for each type in Program 81-06 (T-Bus) and Pro-

gram 82-06 (S-Bus).

21 Number of Ports 0 = Auto

1 = 4 Ports

2 = 8 Ports

3 = 12 Ports

4 = 16 Ports

5 = 20 Ports

22 QSIG Operation Mode

If the UX5000 is attached to a QSIG

network, enable this option. The

ISDN lines will be marked in the

UX5000 data by a new ﬂag to indi-

cate the length of the call reference

value.

0 = Disable

1 = Enable

23 Straight Wiring 0 = Auto

1 = Manual (Cross)

2 = Manual (Straight)

Item

No.

Item Input Data Default