System information

Program 10 : System Configuration Setup
10-03 : Blade Setup
UX5000 Software Program Manual Programming ◆ 23
Note 1. The start port number of a BRI line is displayed. Two logic ports are automatically
assigned to a BRI line.
Note 2. Each timer value of Layer3 are set up for every type of Program 81-06 (T-Bus) and Pro-
gram 82-06 (S-Bus).
18 Type of Number
Use this option to define the ISDN
numbering plan to allow the calling
party information to be passed to some
telcos.
Within QSIG networks, a private num-
ber plan may be used and announced
in the Called Party Number and Call-
ing Party Number information ele-
ments by the Number Plan Indicator 9
(binary 1001). This can be set in Pro-
grams 10-03-18 and 10-03-19.
0 = Unknown
1 = International number
2 = National number
3 = Network Specific number
4 = Subscriber number
5 = Abbreviated number
2
19 Numbering Plan Identification
Set the type of information passed to
some telcos.
Within QSIG networks, a private num-
ber plan may be used and announced
in the Called Party Number and Call-
ing Party Number information ele-
ments by the Number Plan Indicator 9
(binary 1001). This can be set in Pro-
grams 10-03-18 and 10-03-19.
0 = Unknown
1 = ISDN numbering plan
2 = Data numbering plan
3 = Telex numbering plan
4 = National standard numbering plan
5 = Private numbering plan
1
20 - Not Currently Used - 0
21 - Not Currently Used - 0
22 QSIG Operation Mode
If the UX5000 is attached to a QSIG
network, enable this option. The ISDN
lines will be marked in the UX5000
data by a new flag to indicate the
length of the call reference value.
0 = Disable
1 = Enable
0
23 Straight Wiring 0 = Auto
1 = Manual (Cross)
2 = Manual (Straight)
0
24 Power feeding for S-Bus 0 = Disable
1 = Enable
0