System information

Program 21 : Outgoing Call Setup
21-05 : Toll Restriction Class
UX5000 Software Program Manual Programming ◆ 369
Default
Conditions
None
11 Intercom Call Restriction 0 = Disable
1 = Enable
This option determines whether an ICM incom-
ing call is restricted.
12 PBX Call Restriction 0 = Disable
1 = Enable
Use this option to set how the UX5000 Toll
Restricts calls over PBX trunks. If you enable
PBX Toll Restriction, the UX5000 begins Toll
Restriction after the PBX access code. The user
cannot dial a PBX extension. If you disable
PBX Toll Restriction, the UX5000 only restricts
calls that contain the PBX access code. The
UX5000 does not restrict calls to PBX exten-
sions. Refer to the PBX compatibility feature.
Make sure Program 21-05-04 (Maximum Num-
ber of Digits Table Assignment) allows for PBX
Toll Call Dialing (normally 12 digits).
13 Restriction of Tie Line
Calls
0 = Disable
1 = Enable
It chooses whether the toll restriction of the dial
set up by 34-08 is enabled or disabled.
34-08
14 Restrict Trunk Transfer for
Incomplete Dial
- - Not Used in U.S. -
15 Restrict Common Hold for
Incomplete Dial
- - Not Used in U.S. -
Item No
123456789101112131415
Class No. 1 0 00000000 0 00000
Class No. 2 0 00011000 0 00000
Class No. 3 1 10011000 0 00000
Class No. 4 1 11011000 0 00000
Class No. 5 1 11011001 0 00000
Class No. 6 1 11011001 1 00000
Class No. 7 1 11011001 1 10000
Class No. 8 1 11111111 1 11000
: ::::::::: : :::00
Class No. 15 1 11111111 1 11000
Item
No.
Item Input Data Description
Related
Program