System information

Program 21 : Outgoing Call Setup
21-01 : System Options for Outgoing Calls
UX5000 Software Program Manual Programming ◆ 361
Conditions
None
Feature Cross Reference
● Central Office Calls, Placing
Terminal Programming Instructions
To enter data for Program 21-01 (System Options for Outgoing Service):
1. Enter the programming mode.
2. 21 01
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press MIC once to enter a new item number.
OR
Press MIC until you’ve exited that series’s programming section.
15 Outgoing Disable on Incoming Line
Enable or disable the Outgoing Disable on
Incoming Line feature.
0 = Disable
1 = Enable
0 15-01-05
21-01-16
21-01-17
80-03-01
16 Supervise Dial Detection Timer
With the Outgoing Disable on Incoming Line
feature, if dial tone is not detected after the
extension answers an incoming line, the
UX5000 determines the call is unable to com-
plete and releases the DTMF receiver.
0-64800 Seconds 20 15-01-05
21-01-15
21-01-17
80-03-01
17 Restriction Digit in Outgoing Disable on
Incoming Line
With the Outgoing Disable on Incoming Line
feature, determine the number of digits to be
dialed before the call should be disconnected.
Digits 0-9 4 15-01-05
21-01-15
21-01-16
80-03-01
21-01-01
TRK_Routing 0:Prior
back
↑ ↓ select
21-01-nn
nnnnn
← →
Item
No.
Item Input Data Default Related Program