System information

Program 20 : System Option Setup
20-31 : Timer Data
UX5000 Software Program Manual Programming ◆ 355
16 24-02-04 Extension Timer Class
of Service
and
Extension’s Class of
Service which per-
formed the blind trans-
fer
Transfer Recall Time
A blind transferred call recalls to the extension
that initially transferred it after this interval.
30 0-64800
17 25-07-02 Trunk Timer Class of
Service
DID/DISA No Answer Time
(Disconnect or IRG or VM)
After this interval expires, the call follows the
programmed Ring No Answer routing (set in
Program 25-04).
30 0-64800
18 25-07-03 Trunk Timer Class of
Service
Disconnect after Re-transfer to IRG
Disconnect after re-transfer to Incoming Ring
Group.
60 0-64800
19 25-07-07 Trunk Timer Class of
Service
Long Conversation Warning Tone Time
(Trunk to Trunk)
Determine the length of time trunk-to-trunk
conversation can talk before the Long Conversa-
tion tone is heard.
180 0-64800
20 25-07-08 Trunk Timer Class of
Service
Long Conversation Disconnect
(Trunk to Trunk)
This timer determines how long the UX5000
will wait before disconnecting a trunk-to-trunk
conversation call after the Long Conversation
tone is heard.
10 0-64800
21 25-07-09 Trunk Timer Class of
Service
DISA Internal Paging Time
This is the maximum length of an Internal Page
placed by a DISA caller. If the Page continues
longer than this interval, the UX5000 terminates
the DISA call.
Use for analog trunks only.
30 0-64800
22 25-07-10 Trunk Timer Class of
Service
DISA External Paging Time
This is the maximum length of an External Page
placed by a DISA caller. If the Page continues
longer than this interval, the UX5000 terminates
the DISA call.
Use for analog trunks only.
30 0-64800
23 31-01-02 Extension Timer Class
of Service
and
Trunk Timer Class of
Service
Page Announcement Duration
This timer sets the maximum length of External
Page announcements.
Not used for analog trunks (use item 22 above
instead).
1200 0-64800
Class of Service Timer Data, Program 20-31
Item
Default:
Class 0
Follows
Program
Type Timer Default
Input
Data