System information

Program 20 : System Option Setup
20-31 : Timer Data
UX5000 Software Program Manual Programming ◆ 353
20-31 : Timer Data
Description
Use Program 20-31 : Timer Data to assign the time entry for each timer. These timers are used
when a class is set with an entry from 1 to 15 in Program 20-28-01 and 20-29-01. When the timer
class is set to 0, the system-wide timer is used instead.
Input Data
Level:
Feature Availability
IN • Available.
Timer Class of Service 1-15
Class of Service Timer Data, Program 20-31
Item
Default:
Class 0
Follows
Program
Type Timer Default
Input
Data
01 20-01-08 Extension Timer Class
of Service
Trunk Queuing Callback Duration Time
Trunk Queuing callback rings an extension for
this interval.
15 0-64800
02 20-01-09 Extension Timer Class
of Service
Callback / Trunk Queuing Cancel Time
The UX5000 cancels an extension’s Callback or
Trunk Queuing request after this interval.
64800 0-64800
03 20-04-03 Extension Timer Class
of Service
Call Coverage Delay Interval Time
(Virtual Extension Key)
If Call Coverage Keys are set for Delayed Ring-
ing (Program 15-11), the call rings the covering
extension after this interval.
10 0-64800
04 21-01-02 Extension Timer Class
of Service
and
Trunk Timer Class of
Service
Intercom Interdigit Time
When placing Intercom calls, users must dial
each digit within this interval.
10 0-64800
05 21-01-03 Extension Timer Class
of Service
and
Trunk Timer Class of
Service
Trunk Interdigit Time
When placing CO calls, users must dial each
digit within this interval.
5 0-64800
06 21-01-09 Extension Timer Class
of Service
Hotline Time Start Time
A Ringdown extension automatically calls its
programmed destination after this interval.
5 0-64800