System information

Program 20 : System Option Setup
20-25 : ISDN Options
UX5000 Software Program Manual Programming ◆ 345
20-25 : ISDN Options
Description
Use Program 20-25 : ISDN Options to define the ISDN UX5000 options.
Input Data
Level:
Feature Availability
IN • Available.
Item No. Item Input Data Default
01 Send the Release Message After Subscriber
Hangs Up
0 = Service Off
1 = Service On
1
02 Progress Indicate Information Element Detect 0 = Service Off
1 = Service On
1
03 Bearer Capability Select from SLT Outgoing 0 = 3.1KHz Audio
1 = Speech
0
04 Send DT Until User Dials the First Digit
(Overlap Sending Mode)
With Overlap Sending Mode, if the network
side stops dial tone when CLI is included in the
SETUP message, the UX5000 sends dial tone
until the user dials the first digit instead of the
network.
0 = Service Off
1 = Service On
0
05 T305 Timer Start After Sending Disconnect
Message
0 = Service Off
1 = Service On
1
06 Call Proceeding Send Mode 0 = Service Off
1 = Service On
1
07 Local Busy Tone Mode Set When Disconnect
Message Received
0 = Local Busy
Tone Off
1 = Busy Tone from
NT (network side)
0
08 Use of Low Layer Compatibility (LLC) 0 = Disable
1 = Enable
1
09 Use of High Layer Compatibility (HLC) Send-
ing
0 = Disable
1 = Enable
1
10 S-Point Terminal Seizes Analog Trunk 0 = Disable
1 = Enable
1
11 Automatic Changing UX5000 Clock When
Date/Time Information Element Received
0 = Disable
1 = Enable
0
12 Incoming Calls Forwarded Out Automatically
Return Connect Message When Outgoing Call
Receives Alerting Message
0 = Disable
1 = Enable
0