System information
Program 20 : System Option Setup
20-14 : Class of Service Options for DISA/E&M
324 ◆ Programming UX5000 Software Program Manual
20-14 : Class of Service Options for DISA/E&M
Description
Use Program 20-14 : Class of Service Options for DISA/E&M to enable/disable DISA and tie
line Class of Service options. You assign a DISA Class of Service to DISA users in Program 25-09.
Assign tie line Classes of Service in 34-02. Up to 15 DISA/E&M Classes of Service can be defined.
Note: Analog trunk-to-analog trunk and ISDN trunk-to-ISDN trunk calls are supported by this
program. However, analog trunk-to-ISDN trunk and ISDN trunk-to-analog trunk calls are
NOT supported by this program.
Input Data
Level:
Feature Availability
IN • Available.
Class of Service Number 01-15
Class of Service Options (DISA/E&M Service), Program 20-14
Item
No.
Item
Input
Data
Default
COS 01-14 COS 15
01 First Digit Absorption
For tie lines, enable or disable the ability to absorb (ignore) the first
incoming digit. Use this to make the tie trunk compatible with 3- and
4-digit tie line service. This option does not apply to DISA.
0 = Off
1 = On
00
02 Trunk Group Routing/ARS Access
This option enables or disables a DISA or tie trunk caller’s ability to
dial 9 for Trunk Group Routing or Automatic Route Selection (ARS).
0 = Off
1 = On
00
03 Trunk Group Access
This option enables or disables a DISA or tie trunk caller’s ability to
access trunk groups for outside calls (Service Code 814).
0 = Off
1 = On
00
04 Common Abbreviated Dialing
This option enables or disables a DISA or tie trunk caller’s ability to
use the UX5000’s Common Abbreviated Dialing.
0 = Off
1 = On
00
05 Operator Calling
This option enables or disables a DISA or tie trunk caller’s ability to
dial 0 for the UX5000 operator.
0 = Off
1 = On
00
06 Internal Paging
This option enables or disables a DISA or tie trunk caller’s ability to
use the UX5000’s Internal Paging.
0 = Off
1 = On
00
07 External Paging
This option enables or disables a DISA or tie trunk caller’s ability to
use the UX5000’s External Paging.
0 = Off
1 = On
00