System information

Program 10 : System Configuration Setup
10-03 : Blade Setup
18 ◆ Programming UX5000 Software Program Manual
03 Additional Data This option is reserved for future use.
3 = Not used
4 = Not used
01-16 (port number) A port number is automatically set as
the order which the terminal started.
0
04 Optional Installed Unit 1
(with Aspire keysets only
- used 10-03-10 for
UX5000 keysets)
0 = none
1 = APR Module
2 = APA Module
3 = ADA Module
4 = CTA Module
5 = CTU Module
0
05 Optional Installed Unit 2
(with Aspire keysets only
- used 10-03-10 for
UX5000 keysets)
0- none
1 = APR Module
2 = APA Module
3 = ADA Module
4 = CTA Module
5 = CTU Module
0
08 Multi-Line Terminal
Type
0 = Dterm3** (UX5000 Keyset)
1 = Dterm8* (Aspire Keyset)
0
09 Side Option
(For SIP keysets, refer to
program 15-05-19.)
0 = No Option
1 = 8LK Unit
2 = 16LK Unit
3 = 24ADM (not yet released)
0
10 Bottom Option
(For UX5000 keysets.
For Aspire keysets, use
10-03-04. For SIP key-
sets, refer to program
15-05-20.)
0 = No Option
1 = APR
2 = ADA
3 = BHA
0
11 Handset Option
(For SIP keysets, refer to
program 15-05-21.)
0 = No Option
1 = PSA/PSD
2 = BCH
0