System information

Program 20 : System Option Setup
20-09 : Class of Service Options (Incoming Call Service)
UX5000 Software Program Manual Programming ◆ 311
20-09 : Class of Service Options (Incoming Call Service)
Description
Use Program 20-09 : Class of Service Options (Incoming Call Service) to define the incoming
call feature availability for each extension’s Class of Service.
Input Data
Level:
Feature Availability
IN • Available.
Class of Service Number 01-15
Class of Service Options (Outgoing Call Service), Program 20-09
Item
No.
Item
Input
data
Default
Related
Program
COS
01-14
COS 15
01 Second Call for DID/ DISA/ DIL/ E&M
Turn off or on the extension’s ability to receive a second call
from a DID, DISA, DIL, or tie line caller.
Note: With this option set to ‘1’, the destination extension must be
busy in order for a second DNIS caller to ring through. If the desti-
nation extension does not have a line or loop key available for the
second call and a previous call is ringing the extension but has not
yet been answered, the second caller will hear busy regardless of
this program’s setting.
0 = Off
1 = On
00
02 Caller ID Display
Turn off or on the Caller ID display at an extension.
0 = Off
1 = On
0 0 15-02-08
03 Sub Address Identification
Define whether an extension displays the Caller Sub-Address.
0 = Off
1 = On
00
04 Notification for Incoming Call List Existence
Determine whether an extension’s display will show “Check
List” when an incoming call has been missed by a user.
0 = Off
1 = On
0 0 20-09-02
05 Setting Handsfree Answerback or Forced Intercom Ringing
Turn off or on an extension’s ability to enable Handsfree
Answerback or Forced Intercom Ringing for their incoming
Intercom calls.
0 = Off
1 = On
1 1 11-11-15
11-11-16
06 Incoming Time Information Display
- Not Used in U.S. -
If this option is set to “1”, the Incoming Call Time is displayed
on the keyset’s LCD while the terminal is ringing.
0 = Off
1 = On
00