System information

Program 20 : System Option Setup
20-07 : Class of Service Options (Administrator Level)
306 ◆ Programming UX5000 Software Program Manual
11 Forced Trunk Disconnect (analog trunk only)
Turn off or on an extension’s ability to use Forced Trunk Dis-
connect.
0 = Off
1 = On
01
12 Trunk Port Disable
Turn off or on an extension’s ability to busy out a trunk. using
Service Code 145. The user which busied out the trunk will
still have access to the trunk for placing outgoing calls. All
other users will be blocked from seizing the trunk to place an
outgoing call. The trunk, however, can still be answered by any
users programmed with the trunk access.
0 = Off
1 = On
0 1 11-10-27
13 VRS Record
Turn off or on an extension’s ability to record, erase and listen
to VRS messages.
0 = Off
1 = On
01
14 VRS General Message Listen
Turn off or on an extension’s ability to dial 4 or Service Code
111 and listen to the General Message
0 = Off
1 = On
0 1 11-10-21
15 VRS General Message Record
Turn off or on an extension’s ability to dial Service Code 112
and record, listen to or erase the General Message
0 = Off
1 = On
0 1 11-10-22
16 - Not Used -
17 - Not Used -
18 SMDR printout accumulated extension data 0 = Off
1 = On
0 1 11-10-23
19 SMDR printout accumulated STG data 0 = Off
1 = On
0 1 11-10-24
20 SMDR printout accumulated account code data 0 = Off
1 = On
0 1 11-10-25
21 - Not Used -
24 Set/Cancel Private Call Refuse
Turn on (1) or off (0) an extension’s ability to use the Private
Call Refuse service code or function key.
0 = Off
1 = On
0 0 11-10-32
25 Set/Cancel Caller ID Refuse
Turn on (1) or off (0) an extension’s ability to use the Caller ID
Refuse service code or function key.
0 = Off
1 = On
0 0 11-10-33
11-10-34
26 DID Mode Switching
Turn on (1) or off (0) an extension’s ability to manually change
the time pattern for a DID Conversion Table.
0 = Off
1 = On
0 0 11-10-35
Class of Service Options (Administrator Level), Program 20-07
Item
No.
Item Input Data
Default
Related
Program
COS
01-14
COS 15