System information

Program 20 : System Option Setup
20-02 : System Options for Multi-Line Terminals
UX5000 Software Program Manual Programming ◆ 295
Conditions
None
Feature Cross Reference
None
12 Forced Intercom Ringing
Use this option to set voice-announce or
Forced Intercom Ringing by default.
Once this option is changed by a user
with service codees 821/823, this setting
is ignored for that extension.
0 = Voice
1 = Ring
0
13 - Not Used -
14 - Not Used - - -
15 Caller ID Display Mode
Determine how the Caller ID should be
displayed for all i-Series terminals when
an incoming call is received. Once the
call is answered, the first line will indi-
cate the trunk number and caller timer
(if enabled).
0 = Displays the line number on line one and the
Caller ID name and number on line 2.
1 = Line 1 displays Caller ID number, Line 2
displays Caller ID name
2 = Line 1 displays Caller ID name, Line 2
displays Caller ID number
0
18 Caller ID Display Time
Use this option to determine how long a
Caller ID record will be displayed on the
terminal’s display when reviewing the
Caller ID calls.
This is separate from the pre-selection
timer set in Program 20-02-06.
0-64800 seconds 30
19 DSS Key Virtual Extension Mode
Select how the virtual extension displays
when pressed. If enabled, it displays as
the virtual extension.
0 = Disabled
1 = Enabled
0
Item
No.
Item Input Data Default