System information

Program 20 : System Option Setup
20-02 : System Options for Multi-Line Terminals
UX5000 Software Program Manual Programming ◆ 293
20-02 : System Options for Multi-Line Terminals
Description
Use Program 20-02 : System Options for Multi-Line Terminals to set various UX5000 options
for Multi-Line Terminals.
Input Data
Level:
Feature Availability
IN • Available.
Item
No.
Item Input Data Default
01 Trunk Loop Key Operation Mode 0 = Indicate Using Loop Trunk
1 = Not indicated
0
Mode 0 = Keep
Lamp
1 = LED Off
Incoming: 300 IPM Red blink
Talking: Green Light-
ing (on Talk-
ing TEL)
LED Off
Holding: 60 IPM
Green blink
(on holding
TEL)
LED Off
02 Trunk Loop Access Key Operating
Mode
Use this option to set the operating mode
of the extension’s trunk group keys. The
keys can be for incoming access, outgo-
ing access or both.
0 = Outgoing / Incoming
1 = Outgoing
2 = Incoming
0
03 BLF Control
Set the conditions under which a Hot-
line, Reverse Voice Over or DSS Con-
sole key indicates that an extension is
busy. Refer to the Reverse Voice Over
feature for more information.
0 = Idle / Busy (ON/OFF)
1 = Busy / Idle (ON/OFF)
1
04 Retrieve the Line After Transfer
Enable (1) or disable (0) an extension’s
ability to answer a call after it’s been
transferred, but before it’s answered.
0 = Not Holding
1 = Holding
1