System information

Program 20 : System Option Setup
20-01 : System Options
UX5000 Software Program Manual Programming ◆ 291
Program 20 : System Option Setup
20-01 : System Options
Description
Use Program 20-01 : System Options to set various UX5000 options.
Input Data
Level:
Feature Availability
IN • Available.
Item
No.
Item Input Data Default
Related
Program
01 Operator Access Mode
When more than one operator is used, set the type of ringing priority
used when an extension calls the operator terminal.
0 = Step
1 = Circular
0 20-17
02 Selectable Text Message Mode
Use this program to select the mode when calling the terminal
which has enabled a Selectable Text Message.
Note: Any extensions previously set with Selectable Display Mes-
saging must cancel the feature and reactivate in order for a change
in this option to take affect.
0 = Call mode
1 = No Answer/
Busy mode
1 11-11-14
15-07-08
03 DSP Sender Resource Selection
With the Caller ID Sender Queuing feature, set the DSP Sender
Resource Selection to "1" (Caller ID Sender).
0 = Conference
1 = Caller ID
2 = MFC
0
04 Network BLF Indication
Used to determine how often the UX5000 updates the DSS key BLF
indications.
For CygniLink, the entry should be “30” in all UX5000s.
0-64800 in 100
ms increments
0 30-05
05 DTMF Receive Active Time
For OPXs, analog terminals and certain analog trunks (like DISA),
the UX5000 attaches a DTMF receiver to the port for this interval.
The UX5000 releases the receiver after the interval expires.
0-64800 seconds 10 25-07-01
06 Alarm Duration
This interval sets the duration of the alarm signal.
0-64800 seconds 30
07 Callback Ring Duration Time
Callback rings an extension for this interval.
0-64800 seconds 15 11-12-05
15-07-35
08 Trunk Queuing Callback Time
Trunk Queuing callback rings an extension for this interval.
0-64800 seconds 15 11-12-05
15-07-35
20-31-01
09 Callback/Trunk Queuing Cancel Time
The UX5000 cancels an extension’s Callback or Trunk Queueing
request after this interval.
0-64800 seconds 64800 11-12-05
15-07-35
20-31-02
10 Trunk Guard Timer
When a trunk is released, the line can be seized again after this timer
expires.
0-64800 seconds 1
11 - Not Used -