System information

Program 15 : Extension, Basic Setup
15-18 : Virtual Extension Key Enhanced Options
UX5000 Software Program Manual Programming ◆ 273
15-18 : Virtual Extension Key Enhanced Options
Description
Use Program 15-18 : Virtual Extension Key Enhanced Options to set the operation of the virtual
key for each extension.
Input Data
Conditions
None
Level:
Feature Availability
IN • Available.
Extension Number Max. 8 digits
Item No. Item Entries Default
Related
Program
01 Operation Mode
Determine whether an exten-
sion should release or retain
the LED display when answer-
ing a virtual extension call.
With an entry of “0”, once the
incoming call is picked up, the
call comes off the virtual
extension key and appears on
the CALL key, line key or loop
key. This programming is
based on each extension, while
Program 20-04-01 is sys-
tem-wide (20-04-01 must be
set to “0” to use this option).
Extension numbers can include
keysets, SLTs and virtual
extension numbers.
0 = Release
to CALL,
Line, or
Loop key
1 = Retain on
Virtual Key
0 20-04-01
02 Key Display
Determine the extension num-
ber a virtual extension should
display when it places an inter-
com call to another extension
user. Selecting (0) will display
the virtual extension number,
while selecting (1) will display
the extension number of the
actual terminal placing the call.
0 = Virtual
Extension
1 = Physical
Extension
0 20-04-01