System information

Program 15 : Extension, Basic Setup
15-07 : Programmable Function Keys
256 ◆ Programming UX5000 Software Program Manual
Conditions
When a key is programmed using service code 852, that key cannot be programmed with a function
using the 851 code until the key is undefined (000). For example with a Park Key programmed by
dialing 852 + *04 must be undefined by dialing 852 + 000 before it can be programmed as a Voice
Over key by dialing 851 + 48.
Feature Cross Reference
Refer to chart above.
Terminal Programming Instructions
To enter data for Program 15-07 (Programmable Function Keys):
1. Enter the programming mode.
2. 15 07
3. Enter the number of the item you want to program.
4. Enter the terminal number to be defined or press FLASH to use the displayed entry.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MIC once to enter a new item number.
OR
Press MIC until you’ve exited that series’s programming section.
*14 ACD Start / End Red On: ACD operation
end
-
*15 ACD Monitor Mode - Terminal Red On: Under monitor -
*16 ACD Standby Mode Red On: Standby -
*17 ACD Wrap-Up Mode Red On: Under work time
Slow Blink (Red): Under
reservation
-
*18 ACD Overflow Control ACD Group Number Red On: Enable
Slow Blink (Red):
Disable
-
*19 ACD Queue Status Display Check -
*30 CALL1 Key
*31 CALL2 Key
15-07-01 TEL301
KY01 = *01
back
↑ ↓ select
15-07-nn TELnnn
nnnnn
← − + →