System information

Program 15 : Extension, Basic Setup
15-05 : IP Terminal Basic Data Setup
242 ◆ Programming UX5000 Software Program Manual
09 Call Control Port 0-65535 0
10 NGT Voice Path Port 0-65535 0
11 Dterm IP Call Procedure Port 0-65535 0 Effective
only for
NGT and
SIP MLT
DT700,
15-05-01.
12 - Not Used -
13 - Not Used -
14 - Not Used -
15 Codec Type
Set the basic CODEC to be used by the termi-
nal. This option is only used when 15-05-01
is set to 0 or 4. UX5000 CODEC is set in
84-11 and 84-24.
1-Type 1
2-Type 2
3-Type 3
4-Type 4
5-Type 5
1 15-05-01
84-11
84-24
16 Authentication Password
Define the Authentication Password. This
option is only used for SIP.
Maximum 24 characters None 15-05-01
17 Calling Party Display Information
Set the Calling Party Display Information.
Non-SIP terminals only use options 0 and 3.
SIP terminals can use settings 0-3.
(Nickname used only between Softphone and
Application Gateway Server. SIP MLT fol-
lows 15-05-04 for nickname.)
0=nickname, 1=display,
2=user part, 3=extension
Nickname
18 IP Duplication Allowed in Group
Some SIP equipment allows multiple Regis-
ter messages to be sent from the same IP
address to different extension numbers. This
program allows the UX5000 to avoid an IP
address conflict. The SIP TA can connect two
SLTs to allow those terminals to work as SIP
extensions. These extension numbers need to
be programmed in the same group in
15-05-18 to use the same IP address. No other
extension numbers should be in this same
group. Without this program entry, the second
Register message from an "already regis-
tered" IP address will be ignored.
0=not used,
1-10=Groups 1-10
0 15-05-01
19 Side Option Information
Set the side option adapter to be used with an
IP terminal.
0=No Option
1=8LK Unit
2=16LK Unit
3=24 ADM
0 10-03-09
15-05-22
Item
No.
Item Input Data Default
Related
Program