System information

Program 15 : Extension, Basic Setup
15-05 : IP Terminal Basic Data Setup
UX5000 Software Program Manual Programming ◆ 241
15-05 : IP Terminal Basic Data Setup
Description
Use Program 15-05 : IP Terminal Basic Data Setup to set up the basic settings for an IP terminal.
Input Data
Level:
Feature Availability
IN • Available.
Extension Number Max. 8 digits
Item
No.
Item Input Data Default
Related
Program
01 Terminal Type for Each Extension
Viewing Only - No changes permitted
0 = NGT
1 = H.323
2 = SIP
3 = MEGACO
4 = DT700
0
02 NGT Fixed Port Assignment
For any Dterm IP terminal, the MAC Address
as indicated on the terminal’s label to assign a
specific extension number.
Use caution when entering in the MAC
Address as the UX5000 will allow duplicate
entries to be made. If there are two duplicate
entries, the lowest matching extension will be
assigned to the MAC Address.
This option does not apply to standard SIP
terminals.
MAC address
00-00-00-00-00-00 to
FF-FF-FF-FF-FF-FF
00-00-00-00-00-00 15-05-01
03 Default URL address
The default URL address for Smart Phone
URL address - 192 Charac-
ters Max.
No setting 15-05-01
04 Nickname
Define the nickname for the IP, H.323/SIP
terminal. Each alias address must be unique
in the UX5000.
Up to 48 Character Length No setting 15-05-01
05-11 For viewing only - These items should not be changed.
05 H.323 Terminal Type 1=Standard H.323
Terminal
2=Net Meeting
0
06 NGT Terminal Type 1=IP70
2=IP80
3=Smart Phone
0
07 Using IP Address 0.0.0.0 ~ 255.255.255.255 0.0.0.0
08 H.323 RAS Port 0-65535 0