System information

Program 15 : Extension, Basic Setup
15-02 : Multi-Line Terminal Basic Setup
232 ◆ Programming UX5000 Software Program Manual
25 -- Not Used -- --
26 MSG Key Operation Mode
Determine whether an extension’s
MSG key should function as a Mes-
sage key or Voice Mail key. If set as a
Message key, the user will be able to
press the key to call the voice mail
only when they have new messages.
0 = Message Key
1 = Voice Mail Key
0
27 Volume Level Retention
This option determines whether a key-
set’s handset volume will change back
to the UX5000 default (0) or whether
it will be retained at the user’s setting
(1) after hanging up the handset.
With software 5.91+, this option will
also affect the volume retention for the
speakerphone as well.
0 = Revert to Default Volume
1 = Retain User’s Setting
1
28 Message Waiting LED Color
This option allows you to select
whether the Message Wait LED
located at the top of the keyset will
flash green (0) or red (1) when a Mes-
sage Wait indication is flashing. By
default, this option is set to "1" (red).
Note that if this LED is also used for
voice mail indications (no Program-
mable Function Key programmed for
voice mail), if there are both voice
mail messages and Message Wait indi-
cations, the color set for Message Wait
will override the color used for voice
mail indications (red).
0 = Flashes Green
1 = Flashes Red
1
29 ISDN Back Tone
This program option can be used to
adjust the PB Back Tone level when
calling an ISDN line.
1-63
(-15.5 to +15.5 db in 0.5 dB steps)
32
30 Toll Restriction Class -Virtual
Extension or Real Extension
Use this program to define which Toll
Restriction class which should be fol-
lowed when placing a call on a virtual/
Multiple Directory Number/Call Cov-
erage key - the keyset’s or the virtual
extension’s.
0 = Virtual Extension
Restriction Class
1 = Actual/Physical Extension
Restriction Class
1 15-02-21
21-21-01
31 -- Not Used -- ---
Item
No.
Item Input Data Default
Related
Program