System information

Program 15 : Extension, Basic Setup
15-02 : Multi-Line Terminal Basic Setup
UX5000 Software Program Manual Programming ◆ 231
21 Virtual Extension Access Mode
(when idle Virtual Extension key
pressed)
Determine whether an extension’s Vir-
tual Extension/Call Coverage Key
should be as a DSS key to the exten-
sion and for receiving calls (0), for
placing and receiving calls (1),or just
receiving incoming calls (2).
If setting Trunk Toll Restriction Level
for a virtual extension, this option
must be set to ’1’ to allow the exten-
sion the ability to place outgoing ICM
or CO calls.
0 = DSS (Inbound/Outbound)
1 = Outgoing
2 = Ignore Key (Inbound)
2 15-02-30
21-21-01
22 Multiple Incoming From Intercom
and Trunk
If enabled, this affects how a Hotline
key lamps, based on the setting in Pro-
gram 22-01-01. If set to 1 for trunk
priority, the Hotline key will lamp
solid when a trunk call rings in. If set
to 0 for intercom priority, the Hotline
key will not lamp for incoming trunk
calls, but will lamp solid for intercom
calls.
If this option is disabled, Hotline keys
will lamp solid for any incoming calls
regardless of the setting in Program
22-01-01.
0 = Disable
1 = Enable
1 22-01-01
23 Abbreviated Dialing Preview Mode
When an abbreviated number is
dialed, determine whether it should be
previewed or dialed immediately.
0 = Preview
1 = Immediately Sent
0
24 Conference Key Mode
This option allows an extension’s
CONF key to be programmed for Con-
ference or for Transfer. When set for
Transfer (1), the user places a call on
hold, dials the extension to which it
should be transferred, the presses the
CONF key. The call is then trans-
ferred. When set for Conference (0),
with an active call, the user presses the
CONF key, places a second call, then
presses the CONF key twice. All the
calls are then connected. In order for
Cordless II and Cordless Lite II users
to use a Flash key, this option must be
set to “1” for those extensions.
0 = Conference
1 = Transfer
0 15-02-05
Item
No.
Item Input Data Default
Related
Program